454xx_barrels
Barrels, Gas and Barrel Spares
A complete range of barrels and the spares you need.
We keep spares for most barrels and valves, if you don't see it please ask. 
!
supercak1

Supercask Barrel 4" neck 6 gall

discontinued- but we will continue to supply spare parts - if you need anything not listed please ask.
beersphere1

Beersphere Barrel 4" neck 40 pints

 

4" Neck barrel so you can get your hand in to clean it.

.
barrelprv

2" inch neck barrel

Reliable cheap barrel with gas valves.

Takes the gas injector or the s30 cylinder
gasempty

S30 Gas (Refill Only)

Re-fill cylinder. Send your old one back to us, we'll send a full one back. Post for  this is £5.00  if you just order a refill.  We'll post it back free if you order other items off us.
gasfull

S30 New Gas Cylinder

Full cylinder. Return when empty. Fits all the barrels we supply. An easier system for post customers is gas 110, the screw on injector with disposable bulbs.
hambard4inchcap

4" Red cap with two valves

 

4" Red Cap Hambleton bard +2 Brass Valves. The injector and the pressure relief.

 Your cap might be an old white one  but if it's  black it's off a different barrel it won't fit.

Fits all current 4" neck barrels

4" Plain cap with holes but no valves

Spare cap only. No Valves but has the holes already cut. If you want one with no holes please ask.
hambardtwoinch

Ham Bard 2" Cap Complete

Fits the Hambletonm Bard barrels. Might not fit other makers barrels.
vinacap

2" Cap for Other Makes of Barrel

Cap and valves , fits all the barrels that the red cap doesn't fit.

2" Blue 'O' ring washer for cap

 
This is the blue washer from under the cap. Your washer will be either a blue O ring or a flat white washer. Make sure you order the right one.

Flat 2" white barrel washer

This is a flat white washer, fits lots of barrels. Make sure you order the right one.
old valve

Brass Release and Injection Valve

Look at the picture! This is the combined release and injection valve. Fits many barrels including the old beersphere with plates

Purple valve washer

Spare small purple inlet sleeve for  the above valve. Your old one may be black or white. This is the inlet rubber which sits under the cap

Brown pressure relief rubber

Spare brown washer, this is on top of the valve. It might be under a metal collar and is the biggest of the two rubber washers.

Small Flat black washer

Flat black washer that goes between the valve and the cap. Yours might be a white washer, this is a better product. Fits most valves of this type
40600004-5

Injection valve for the 4"cap

Small brass injection valve with orange washer. This is off the red 4" cap.

Orange Rubber

Washer for the inlet only valve
40600006-1

Pressure relief valve for 4" barrel

Pressure relief valve foir the red 4" cap.

Yellow rubber for pressure relief valve

Yep, the yellow rubber
gasbulbs

Pack of ten small gas bulbs

These fit the co2 injector and are the old soda syphon bulbs.

Just throw away when used
injectoronly

Gas Injector

Takes the small throw away soda syphon bulbs and is a good system for mail customers. Saves returning the big s30 cylinders